CreateBucket and PutBucketAcl with x-amz-grant-* headers stored the
requested grants plus a FULL_CONTROL grant for the bucket owner, so
GetBucketAcl returned a grant AWS doesn't. On AWS the headers replace the
whole ACL and the owner gets FULL_CONTROL only when a header names it.
UpdateACL now keeps just the header grants when there are any. A canned
ACL and a bucket created without grants still get the owner's FULL_CONTROL
grant. The owner keeps full access either way, since aclAllows lets the
bucket owner perform any action regardless of grants.
Fixes#1407
Since fasthttp v1.70.0 an HTTP/1.1 request without a Host header is
rejected and the gateway answers it with 400 BadRequest. Add a server
test that sends such requests over a raw connection and stop skipping
the REST missing host test against the gateway.
Fixes#1530
getobject and headobject silently ignored any response-* query parameter outside the six overridable headers. they now return 400 InvalidArgument naming the parameter and its value, like s3, and the rest tests skipped for this issue are enabled.
Fixes#2075
listobjects v1 now returns InvalidArgument when the start-after query parameter is present, matching s3, which only accepts it with list-type=2. previously the parameter was silently ignored.
Fixes#2004
the unsupported authorization type error only echoed the algorithm back in ArgumentValue, while s3 returns the whole Authorization header there. the parse error now carries the raw header and the s3 error mapping uses it, which also lets the bats test skipped for #1705 run again.
Fixes#2489
* fix: reject ListMultipartUploads requests that also carry uploadId
A bucket GET with both the uploads and uploadId query parameters was
routed to ListMultipartUploads and answered with the upload listing.
S3 rejects the combination with 400 InvalidArgument, "Conflicting query
string parameters: uploadId, uploads".
Add an error route for the combination ahead of ListMultipartUploads,
the way the object level '?uploads' request is rejected, and enable
the REST test that covers it.
Fixes#2155
* fix: reject uploads with uploadId for every bucket and object operation
Requests carrying both the uploads and uploadId query parameters were
only rejected for a bucket GET, so DELETE, PUT, POST and HEAD on the
bucket or object paths still ran real operations. S3 rejects the
combination for every method on both paths, before authentication and
before checking that the bucket exists.
Register the error route for all methods on the bucket and object
routers right after the CORS middleware is set up, ahead of every other
route, and cover each method and path with an integration test.
S3 never lists an empty result for another region: a valid region
other than the endpoint's own gets 400 InvalidArgument, "Requests with
bucket-region specified must be made to the corresponding regional
endpoint", with no ArgumentValue. The gateway is a single regional
endpoint, so it now does the same instead of clearing the listing.
Match the region case-insensitively like S3, and check an empty
bucket-region= too by looking for the query argument itself, since an
empty value is not a valid AWS region either.
Requests carrying both the uploads and uploadId query parameters were
only rejected for a bucket GET, so DELETE, PUT, POST and HEAD on the
bucket or object paths still ran real operations. S3 rejects the
combination for every method on both paths, before authentication and
before checking that the bucket exists.
Register the error route for all methods on the bucket and object
routers right after the CORS middleware is set up, ahead of every other
route, and cover each method and path with an integration test.
With an upload-id-marker the lister ranges over Uploads[startIndex:],
but passed the index of that subslice to hasMoreAfter, which indexes
the full list. A page that ended on the last remaining upload was still
reported as truncated, with next markers pointing at that upload, so a
client had to make one more request to get an empty page.
Iterate over the full list from startIndex, so hasMoreAfter gets the
real position of the next upload.
The posix and azure backends dropped every upload with a key equal to
the key-marker before handing the list to the lister, which then looked
for the upload-id-marker under the next key. An upload-id-marker that
belongs to the key-marker could never be found, so the request failed
with "Invalid uploadId marker", including when a client paged with the
NextKeyMarker and NextUploadIdMarker the gateway returned.
Keep the uploads of the key-marker itself when an upload-id-marker is
set, so the listing continues right after the given upload, as S3 does.
Enable the REST test that covers it.
Fixes#2149
An upload-id-marker sent without a key-marker is ignored for the
listing, but the gateway still echoed it back in UploadIdMarker. S3
discards the parameter in that case and returns an empty
UploadIdMarker.
Clear the marker in the controller when no key-marker is given, so
every backend gets the same input and the response no longer reports
a marker that had no effect.
Fixes#2150
NextKeyMarker and NextUploadIdMarker were only set for a truncated
listing, so a ListMultipartUploads response that fit in one page
returned them empty. S3 still sets them to the key and upload ID of
the last upload in the response.
Fill both markers from the last listed upload when the listing is not
truncated, including the case where the page ends exactly at
max-uploads. A page of common prefixes only keeps them empty, as
before. Enable the REST test that covers it.
Fixes#2144
ListBuckets ignored bucket-region: a value that is not a region was
accepted, and a region other than the gateway one still listed every
bucket. S3 rejects an invalid value with 400 InvalidArgument, "Argument
value abc is not a valid AWS Region", and lists only the buckets of the
requested region.
Check bucket-region against the AWS region code format, always
accepting the gateway region whatever its name, and return an empty
list for any other region, since every bucket lives in the gateway
region. Enable the REST tests that cover both cases.
Fixes#1923Fixes#1930
A DeleteObjects request whose Delete element names no objects was
answered with 200 and an empty DeleteResult. S3 rejects it with
MalformedXML, as the schema requires at least one Object.
Reject the empty list right after the body is parsed, next to the
1000 key limit check. Update the unit and integration tests that
expected the empty result and enable the REST test that covers it.
Fixes#2109
A bucket GET with both the uploads and uploadId query parameters was
routed to ListMultipartUploads and answered with the upload listing.
S3 rejects the combination with 400 InvalidArgument, "Conflicting query
string parameters: uploadId, uploads".
Add an error route for the combination ahead of ListMultipartUploads,
the way the object level '?uploads' request is rejected, and enable
the REST test that covers it.
Fixes#2155
A request path with an invalid percent escape, such as "/bucket/%zz",
failed url.PathUnescape in the DecodeURL middleware and the raw error
was answered with 500 InternalError. S3 rejects such a request with
400 InvalidURI.
Return InvalidURI from DecodeURL, so the s3 and admin routers answer
with it as well, and let the website handler pass the error through
instead of mapping it on its own.
Fixes#2070
dualfroz
upstream